www.www.buonovino.com

STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]
Forum SubscriptionsSubscriptionsDigestDigest PreferencesFAQFAQSearchSearchMemberlistMemberlistUsergroupsUsergroupsRegisterRegisterFAQ安全提示FAQDonate
ProfileProfileLog in to check your private messagesLog in to check your private messagesLog in to websiteLog in to websiteLog in to websiteLog in to forum
Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses.
Use online scanners here and here to upload downloaded attachment to check for safety.

Maximum height of wall
Post new topicReply to topicThank Post www.www.buonovino.com Forum Index->SEFI General Discussion
View previous topic::View next topic
Author Message
hishamajmalpc
...
...


Joined: 09 Nov 2015
Posts: 57
PostPosted: Thu Apr 13, 2023 4:53 pmPost subject: Maximum height of wall Reply with quote
Dear SEFIANS,

what is the maximum safe height for a 20cm thick laterite/similar wall to be constructed as a partition wall in Framed building? How to increase height without increasing the thickness?

regards
Back to top
View user's profileSend private message
Thankful People
1user(s) is/are thankful for this post.
vikram.jeet
General Sponsor
General Sponsor


Joined: 26 Jan 2003
帖子:3698
PostPosted: Fri Apr 14, 2023 3:14 amPost subject: Reply with quote
Provide rcc band at Lintel level and ht can be increased.


Generally wall shall be seen for L/t and H/t ,,

Whichever less and to be less than 12

But provision of lintel band the H is lintel ht instead of clr roof ht.

Band to be designed for wind /Eq forces along lateral direction.
Back to top
View user's profileSend private message
spsvasan
...
...


Joined: 18 Dec 2008
Posts: 374
Post发布:莫n Apr 17, 2023 2:51 amPost subject: Re: Maximum height of wall Reply with quote
hishamajmalpcwrote:
Dear SEFIANS,

what is the maximum safe height for a 20cm thick laterite/similar wall to be constructed as a partition wall in Framed building? How to increase height without increasing the thickness?

regards



Apart from the horizontal band at lintel level suggested by Er.Vikramjeet, you can also use vertical bands, properly anchored at the bottom to increase the allowable height.

S.P.Srinivasan
Back to top
View user's profileSend private message
vikram.jeet
General Sponsor
General Sponsor


Joined: 26 Jan 2003
帖子:3698
PostPosted: Wed Apr 19, 2023 3:38 amPost subject: Reply with quote
As guided by Er Srinivasan saheb, vertical rcc bands can also be provided along with Lintel band . Lintel bands are also a prerequisite for EQ resistant in Brick walls.

Vertical rcc band if provided, even without lintel band will reduce the effective Length of wall, and L/t Or H/t whichever least needed. Rcc band in this case need to be designed for wind/Eq on wall to be transferred to vertical band. The vertical band will span between floors beams at bottom & top.
Back to top
View user's profileSend private message
Display posts from previous:
Post new topicReply to topicThank Post www.www.buonovino.com Forum Index->SEFI General Discussion All times are GMT
Page1of1



Jump to:
Youcannotpost new topics in this forum
Youcannotreply to topics in this forum
Youcannotedit your posts in this forum
Youcannotdelete your posts in this forum
Youcannotvote in polls in this forum
Youcannotattach files in this forum
Youcandownload files in this forum


© 2003, 2008 SEFINDIA,Indian Domain Registration
Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service.advertisement policy
Baidu
map